Please Find Bellow Configuration Settings Required for use with Dynamic Access
AU #1 Administration: https://serv1.dynamicaccess.net:8443
AU #1 FTP Access: ftp://serv1.dynamicaccess.net
POP3 server (Port 110): mail.<your full domain name>
#1 Most ISP's block Port 25 (SMTP) Outbound Email, #2 #3 #4
To Send Mail via your domain. aka <your.domain.name>,
you will need to enable in your Outgoing Email Settings,
(inside account options) My Server Requires Authentication.
To ensure that you can send email from anywhere e.g.
from a Wireless Service or a Hotel we recommend that
you setup your mail Client to use SMTP /w SSL on Port 465
To ensure SMTP /w SSL will work correctly, you will need to
enable SSL in your Email Settings and set the port correctly,
SMTP Port Number: 465 POP3 Port Number: 995
you also need to set the server to: mail.dynamicaccess.net
(inside advanced account settings)
Make sure SPA or Secure Password Authentication is
turned OFF / Disabled...(this is a microsoft only protocol)
Customers using our mail servers as "External MX Delivery"
for either Redundancy &/or Filtering, please make sure your
Firewall is configured to allow inbound SMTP (Port 25)
connections from the following IP Address Ranges ...
| Please Note: ip ranges scheduled for |
| removal are still required until notified |
210.7.50.0/27 [ Current Active Range ]
220.157.92.224/29 [ Removal by 01/07/2012 ]
220.157.92.72/29 [ Removed on 01/07/2011 ]
iPhone / Smartphone FAQ's
Incoming Mail Settings:
Host Name: mail.dynamicaccess.net
User Name: {your full email address}
Advanced Settings Required ...
Use SSL: On (Enabled)
Server Port: 995
Outgoing Mail Settings:
Host Name: mail.dynamicaccess.net
User Name: {your full email address}
Use SSL: On (Enabled)
Server Port: 587
If the phone cannot confirm the identity of the Server
you will need to accept the SSL certificate that it displays.
Serving the Needs of the Inernet & North QLD Community Since 1995
